調心球淮安INA軸承是在兩個滾道的內圈和具有球面的滾道的外圈之間裝配球面的軸承.外滾道表面的曲率中xin與軸承中xin的曲率中xin相同,因此具有與自動調心球軸承相同的調心功能.當軸和殼體發生偏轉時,可在不增加軸承負荷的情況下自動調整.調心滾子軸承能承受兩個方向的徑向和軸向載荷.
The aligning ball Huaian INA bearing is a bearing with spherical su-ce assembled between the inner ring of two raceways and the outer ring of raceway with spherical su-ce. The curvature of the outer raceway su-ce is the same as that of the bearing, so it has the same aligning function as the automatic aligning ball bearing. When the shaft and shell deflect, it can be adjusted automatically without increasing the bearing load. Self-aligning roller bearings can withstand radial and axial loads in both directions.
調心球淮安INA軸承具有較大的徑向承載能力,適用于重載和沖擊載荷.內環內徑為帶錐孔軸承,可直接安裝.或者夾緊套和拆卸缸安裝在圓柱軸上.保持架是通過按壓保持架和聚酰胺制成的.調心球軸承適用于重型和沖擊載荷,、精*密儀器、低噪聲電機,、汽車,、摩托車,、冶金、軋鋼,、采礦,、石油、造紙,、水泥,、制糖工業和通用機械.
Huai'an INA bearing with self-aligning ball has large radial bearing capacity and is suitable for heavy load and impact load. The inner diameter of the inner ring is a bearing with tapered holes, which can be installed directly. Or the clamping sleeve and the removal cylinder are installed on the cylindrical shaft. The cage is made by pressing the cage and polyamide. Self-aligning ball bearings are suitable for heavy and impact loads, precision instruments, low noise motors, automobiles, motorcycles, metallurgy, steel rolling, mining, petroleum, -, cement, sugar industry and general machinery.
滾針淮安INA軸承采用細長滾針(滾針長度為直徑的3-10倍,直徑一般小于5毫米),徑向結構緊湊.當軸承的內徑尺寸和承載力與其余類型的軸承相同時,外徑**小,特別適用于徑向安裝尺寸有限的支承結構.滾針軸承可根據不同的使用場合選擇不帶內環或滾針保護的軸承.與軸承配合的軸頸和殼體孔的表面直接作為軸承的內外滾動面.為了保證軸承的承載能力和運行性能與環形軸承相同,軸或殼孔滾道的表面硬度應加工準確,表面質量應與軸承環相同.
Huaian INA bearings are made of slender needles (needle length is 3-10 times of diameter, diameter is generally less than 5 mm), and the radial structure is compact. When the bearing's inner diameter size and bearing capacity are the same as other types of bearings, the outer diameter ** is small, especially suitable for supporting structures with limited radial mounting size. Needle roller bearings can be selected without inner ring or needle roller protection according to different use occasions. The su-ce of the journal and shell hole matched with the bearing directly acts as the inner and outer rolling su-ce of the bearing. In order to ensure that the bearing capacity and operation performance are the same as the ring bearing, the su-ce hardness of the raceway of the shaft or shell hole should be processed accurately, and the su-ce quality should be the same as that of the bearing ring.
復合滾針淮安INA軸承由向心滾針軸承和推力軸承組成.該機組結構緊湊,體積小,旋轉精度高,能承受較大的徑向載荷和一定的軸向載荷.產品結構多樣,適應性強,安裝方便.復合滾針軸承廣泛應用于機床、冶金機械,、紡織機械,、印刷機械等機械設備中,使機械系統設計十分緊湊靈活.
Composite needle roller Huaian INA bearing is composed of centripetal needle roller bearing and thrust bearing. The unit has compact structure, small volume, high rotation accuracy, and can withstand large radial load and certain axial load. Product structure is diverse, adaptable and easy to install. Composite needle roller bearings are widely used in machine tools, metallurgical machinery, textile machinery, printing machinery and other mechanical equipment, - the mechanical system design very compact and flexible.
推力球淮安INA軸承分為單向和雙向兩種.它們只能承受軸向載荷,不能承受任何徑向載荷.推力軸承分為緊環和環兩部分.環由襯套擰緊,活套支撐在軸承座上.環和輥通常由滾動軸承鋼制成,具有高*強度和良好的耐磨性.淬火后的表面硬度應達到HRC60-65.籠子是用軟鋼做的.它也可以由銅合金膠合板或塑料制成.
Thrust ball Huaian INA bearings are divided into two kinds: one-way and two-way. They can only withstand axial loads and can not withstand any radial loads. Thrust bearing is divided into two parts: tight ring and ring. The ring is tightened by the bushing, and the looper is supported on the bearing seat. Rings and rolls are usually made of rolling bearing steel with high strength and good wear resistance. The su-ce hardness after quenching should reach HRC60-65. The cage is made of soft steel. It can also be made of copper alloy plywood or plastic.

文章來自:淮安SKF軸承 -
Article from: Huaian SKF Bearing -
文章來自:淮安INA軸承 -
Article from: Huaian INA Bearing -
文章來自:淮安NSK軸承
Article from: Huaian NSK Bearing

QQ:
電話:0
手機:/

淮安INA軸承NUTR110260滾針系列與調心的應用平臺是鴻御（上海）國際貿易有限公司的主要產品,我們的產品負責人是趙先森,我們的地址是新吳區金城東路299號臺灣街89棟111-112號,期待與您的合作!