如果上述兩種情況不好,，則軸和徐州SKF軸承箱的精度差,，軸的偏移量大?？吹竭@一點,，我想每個人都想知道解決方案。首先,，對潤滑油及潤滑方法進行了研究,。選擇合適的潤滑劑及其用量，選擇合適的軸承,。檢查車軸和軸承箱的精度,。如果你身邊有專家，讓他跟著你學**好的,！后期會出現結構不合理,、數據質量差、性能差,、任務外觀,、沖擊、振動,、裝置不當,、平滑度差等缺點，形成有*效的徐州SKF軸承,。然而,，在某些情況下,，一些進口軸承尚未投入使用（運行），但用戶的原始外觀在安裝過程中受損,，可用性喪失,，軸承的形成過早生效。

If the above two conditions are not good, the accuracy of the shaft and Xuzhou SKF bearing box is poor, and the offset of the shaft is large. Seeing this, I think everyone wants to know the solution. Firstly, the lubricating oil and lubricating methods are studied. Choose the appropriate lubricant and its dosage, select the appropriate bearing. Check the accuracy of axle and bearing box. If you have an expert around you, let him follow you. Later, there will be unreasonable structure, poor data quality, poor performance, task appearance, impact, vibration, improper device, poor smoothness and other shortcomings, forming an effective Xuzhou SKF bearing. However, in some cases, some imported bearings have not been put into use (operation), but the original appearance of the user is damaged in the installation process, the usability is lost, and the formation of bearings takes effect prematurely.

它在基體連續性,、偏析性和脆性方面與碳化物帶具有相同的作用,。大大降低了馬氏體基體的色濃度差，提高了環的顯微硬度,，改變了環在調質條件下綜合力學性能的蓬松缺點,。

It plays the same role as the carbide band in matrix continuity, segregation and brittleness. The color concentration difference of martensite matrix is greatly reduced, the microhardness of the ring is improved, and the flabbiness of the comprehensive mechanical properties of the ring under quenched and tempered conditions is changed.

根據徐州SKF軸承安裝、使用和維護的技術要求,，對運行中軸承的負荷,、轉速、工作溫度,、振動,、噪聲和潤滑情況進行監測和檢查。立即發現異常原因,，調整后恢復正常操作,。此外，分析和測試潤滑脂的量以及周圍的介質和大氣也很重要,。

According to the technical requirements of installation, use and maintenance of Xuzhou SKF bearings, the load, speed, working temperature, vibration, noise and lubrication of bearings in operation are monitored and inspected. The abnormal cause was found immediately and normal operation was resumed after adjustment. In addition, it is also important to analyze and test the amount of grease and the surrounding medium and atmosphere.

調心球軸承失效的內在因素主要是結構設計,、制造工藝和材料質量。

The internal factors of the failure of self-aligning ball bearings are mainly structural design, manufacturing process and material quality.

分析調心球軸承失效原因的主要任務是根據大量的背景資料,、分析數據和失效形式,，找出造成軸承失效的主要因素，并提出改進措施,，延長徐州SKF軸承的使用壽命,，避免軸承突然早期失效。

The main task of analyzing the failure causes of self-aligning ball bearings is to find out the main factors causing the failure of bearings based on a large number of background information, analysis data and failure forms, and put forward improvement measures to prolong the service life of Xuzhou SKF bearings and avoid sudden early failure of bearings.

文章來自：徐州SKF軸承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章來自：徐州INA軸承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章來自：徐州NSK軸承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757