雖然它是一種金屬，它也會受到損壞,，無論什么硬質材料都會受到損壞，但損壞的程度并不相同。眾所周知,，徐州NSK軸承質量好,，鋼性好。鋼是一種非常堅固的材料,，但是它也可能被損壞,。機器上的軸承每天都運轉。摩擦力恒定,，軸承容易損壞,。因此，我們還需要防止軸承損壞,，維護軸承,，不要亂用它們，給自己造成不必要的損失,。

Although it is a metal, it will also be damaged, no matter what hard material will be damaged, but the degree of damage is not the same. As we all know, Xuzhou NSK bearings are of good quality and steel. Steel is a very strong material, but it can also be damaged. The bearings on the machine run every day. Friction is constant, bearing is easy to damage. Therefore, we also need to prevent bearing damage, maintain bearings, do not use them indiscriminately, causing unnecessary losses to ourselves.

為了保證安裝過程中會產生過大的變形,，我們還必*須從這些方面著手,，對于雙列深溝球軸承需要做很多事情，下面需要注意徐州NSK軸承的影響,。

In order to ensure that the installation process will produce excessive deformation, we must also start from these aspects, for double row deep groove ball bearings need to do a lot of things, the following need to pay attention to the impact of Xuzhou NSK bearings.

現象：

Phenomenon:

1)發動機怠速時無明顯噪聲,，但發動機以中高速(曲軸箱)運轉時，會發出“咯咯”聲,。

1) There is no obvious noise when the engine idles, but when the engine runs at medium and high speed (crankcase), it will produce a "cackle" sound.

2)緊急加油后油門開*鎖時,，聲音更加明顯。

2) When the throttle is unlocked after emergency refueling, the sound is more obvious.

3)溫度變化不明顯,。隨著負載的增加,，聲音增加。

3) The change of temperature is not obvious. As the load increases, the sound increases.

4)徐州NSK軸承聲音比聲音慢而且短,。

4) Xuzhou NSK bearings sound slower and shorter than the sound.

Diagnosis：

Diagnosis:

1)當發動機轉速?gòu)牡∷僮優橹兴贂r(shí),，聲音清晰。隨著轉速的提高,，軸承噪聲越來越突出,。

1) When the engine speed changes from idle to medium speed, the sound is clear. With the increase of rotational speed, bearing noise becomes more and more prominent.

2)氣缸耐火試驗，噪聲降低或消失,，即軸承噪聲,。

2) Cylinder fire resistance test, noise reduction or disappearance, that is, bearing noise.

3)無論速度或溫度是高還是低，它發出聲音,，發動機振動,。如果火試的聲音沒有改變，合金將被燒蝕,。

3) Whether the speed or temperature is high or low, it makes sound and the engine vibrates. If the sound of the fire test does not change, the alloy will be ablated.

當我們使用徐州NSK軸承時,，我們必*須注意軸承的清潔度，這對我們很重要,。當我們使用軸承時,，我們的軸承需要清洗一段時間。在日常清洗中,，不能使用堿性溶液,，以免軸承內部碎片引起滑塊開裂。我們還需要注意軸承的潤滑,，這也是非常重要的,。

When we use Xuzhou NSK bearings, we must pay attention to the cleanliness of bearings, which is very important to us. When we use bearings, our bearings need to be cleaned for a period of time. In daily cleaning, alkaline solution should not be used to avoid slider cracking caused by internal debris of bearing. We also need to pay attention to the lubrication of bearings, which is also very important.

使用時，發現潤滑可以減少軸承和機械之間的摩擦,。這對我們的軸承也有很大的好處。我們不應該忽視它,。這兩點將大大提高你在使用過程中使用的徐州NSK軸承周期,，這將大大延長你的使用周期,，所以我們必*須注意這兩點。

When used, it is found that lubrication can reduce friction between bearings and machinery. This is also of great benefit to our bearings. We should not ignore it. These two points will greatly improve the cycle of Xuzhou NSK bearings you use in the process of using, which will greatly prolong your service life, so we must pay attention to these two points.

文章來自：徐州SKF軸承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章來自：徐州INA軸承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章來自：徐州NSK軸承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757