深溝球軸承主要用于徑向和徑向載荷和軸向載荷,。當深溝球軸承徑向間隙較大時,，具有角接觸軸承的性能,，能夠承受較大的軸向載荷。它也具有一定的心理調節能力,。深溝球軸承的摩擦系數很小,，極限速度很高。

Deep groove ball bearings are mainly used for radial and radial loads and axial loads. When the radial clearance of deep groove ball bearing is large, it has the performance of angular contact bearing and can bear large axial load. It also has certain psychological adjustment ability. The friction coefficient of deep groove ball bearings is very small, and the limit speed is very high.

深溝球軸承除了基本類型外,，泰州SKF軸承還有各種結構,，如：帶防塵蓋的深溝球軸承；帶橡膠密封圈的深溝球軸承,；帶止動槽的深溝球軸承,；承載能力大的深溝球軸承。H型球槽口,；雙列深溝球軸承,。

In addition to the basic types of deep groove ball bearings, Taizhou SKF bearings also have various structures, such as: deep groove ball bearings with dust cover; deep groove ball bearings with rubber sealing rings; deep groove ball bearings with stop grooves; deep groove ball bearings with large carrying capacity. H ball notch; double row deep groove ball bearings.

高溫深溝球軸承

High temperature deep groove ball bearing

在窯車、高爐或噴漆設備的傳動系統中,，軸承**須工作在極高溫度下,，或者**須承受很大的溫差。普通軸承不適用,。

In the transmission system of kiln car, blast furnace or paint spraying equipment, bearing ** must work at extremely high temperature, or ** must bear a large temperature difference. Ordinary bearings are not applicable.

高溫軸承的設計主要通過優化泰州SKF軸承材料,、結構、內部工藝尺寸和潤滑條件來滿足不同工況的要求,。

The design of high temperature bearing mainly meets the requirements of different working conditions by optimizing the material, structure, internal process size and lubrication conditions of SKF bearing in Taizhou.

高溫深溝球軸承具體分為五個不同系列：

High temperature deep groove ball bearings are specifically divided into five different series:

**高溫軸承-高溫石墨保持器深溝球軸承：它具有**高溫無潤滑的特點,，適用于-50~500~C的溫度環境。

High temperature bearing - high temperature graphite retainer deep groove ball bearing: It has the characteristics of ** high temperature without lubrication, and is suitable for temperature environment of - 50 ~ 500 ~ C.

石墨籠安裝在軸承上,。泰州SKF軸承及防塵罩表面涂覆**酸錳,，具有防腐蝕效果，可提高操作性能,。石墨籠將球分開,，在旋轉過程中釋放的石墨顆粒為軸承提供足夠的潤滑。軸承裝有兩個防塵蓋,，以引導保持架在軸向方向,，以防止固體污染物進入。這種軸承的另一個優點是其良好的環保性能,。即使在**高溫度,，也不排放危險氣體。（實例軸承代碼方式：

The graphite cage is mounted on the bearing. Taizhou SKF bearing and dust-proof cover is coated with acid manganese, which has anti-corrosion effect and can improve operation performance. The graphite cage separates the ball, and the graphite particles released during the rotation provide enough lubrication for the bearing. The bearing is equipped with two dust shields to guide the cage in the axial direction to prevent solid contaminants from entering. Another advantage of this bearing is its good environmental protection performance. Even at high temperatures, no dangerous gas is emitted. (example bearing code way:

關于不對中

about misalignment

高溫深溝球軸承由于內部間隙大,，泰州SKF軸承能夠承受外圈相對于內圈20-30弧度的角位移,。這僅適用于軸承的緩慢旋轉；在滾動條件下,，上述不對準對軸承的使用有不利影響,。

High temperature deep groove ball bearings have large internal clearance, so Taizhou SKF bearings can withstand the angular displacement of the outer ring relative to the inner ring of 20-30 radians. This is only applicable to the slow rotation of bearings; under rolling conditions, the misalignment mentioned above has adverse effects on the use of bearings.

高溫軸承轉速

High temperature bearing speed

高溫軸承通常按公差制造,，其間隙比普通軸承大得多，因此通常不適合高速運行,。但是它可以運行在100轉/分鐘,。

High temperature bearings are usually manufactured according to tolerance, and their clearance is much larger than that of ordinary bearings, so they are usually not suitable for high-speed operation. But it can run at 100 rpm.

高溫軸承公差

High temperature bearing tolerances

高溫深溝球泰州SKF軸承是按照一般公差制造的，符合國家標準,。

High temperature deep groove ball Taizhou SKF bearings are manufactured according to general tolerances and conform to national standards.

然而,，軸承公差可能與標準公差略有不同，這是由于為了防止腐蝕和提高操作性能,，進行了特殊處理,。上述偏差對安裝或軸承的運行沒有影響。

However, bearing tolerances may differ slightly from standard tolerances due to special treatment to prevent corrosion and improve operational performance. The above deviation has no effect on the operation of the installation or bearing.

軸承尺寸與載荷的關系

Relationship between bearing size and load

軸承的尺寸是決定軸承承受多少負荷的一個重要因素,。

The size of the bearing is an important factor determining how much load the bearing will bear.

文章來自：泰州SKF軸承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章來自：泰州INA軸承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章來自：泰州NSK軸承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757