淮安INA軸承解決方案主要是解決汽車的三個基本要素:平穩行駛、快速轉向,、緊急停車.只有有了這三個要素,用戶才能感到放心和安心.軸承可以成為汽車零部件的國際品牌,這取決于汽車零部件領域各種產品的不斷創新和擴張,從而成為行業的佼佼者.

Huaian INA bearing solution is mainly to solve the three basic elements of the car: smooth driving, fast steering, emergency parking. only with these three elements can users feel at ease. Bearing can become an international brand of automotive parts, which depends on the continuous innovation and expansion of various products in the field of automotive parts, thus becoming the industry leader.

拆卸圓柱和圓錐孔軸承時,您有什么預防措施嗎?圓柱孔軸承和圓錐孔軸承可以通過不同的拆卸方法進行拆卸,達到拆卸效果.

Do you have any precautions when removing cylindrical and tapered bore bearings? Cylindrical hole bearing and tapered hole bearing can be disassembled by different disassembly methods to achieve disassembly effect.

軸承內圈的拆卸可通過機械拔出完成.此時,應注意讓內環承受其張力.

The disassembly of bearing inner ring can be accomplished by mechanical pull-out. At this time, attention should be paid to let the inner ring bear its tension.

拆下帶緊固套的小入口軸承,用固定在軸上的齒輪組支撐內環,轉動螺母幾次,然后敲擊螺母.大型軸承更容易被油壓.圓錐孔軸油孔充油使內環膨脹,使進口淮安INA軸承解體.在運行中,軸承可能突然出現.zui好使用螺母作為齒輪組.

Remove the small entry bearing with fastening sleeve, support the inner ring with the gear set fixed on the shaft, rotate the nut several times, and then hit the nut. Large bearings are more susceptible to oil pressure. Oil filling in the oil hole of conical hole axle expands the inner ring and disintegrates the imported Huaian INA bearing. In operation, bearings may suddenly appear. Zui is good at using nuts as gear sets.

拆卸過盈配合外環時,應事先在外環圓周上設置幾個擠壓螺栓.拆卸時應均勻擰緊.這些孔通常由單獨的軸承覆蓋,如塞子和圓錐滾子軸承.殼體的肩部設有若干凹槽.拆下墊圈的螺孔并按壓或輕敲.

When disassembling the interference fit outer ring, several extrusion bolts should be set on the circumference of the outer ring beforehand. When disassembly, it should be tightened evenly. These holes are usually covered by separate bearings, such as plugs and tapered roller bearings. The shoulder of the shell is provided with a number of grooves. Remove the screw hole of the washer and press or tap it.

大軸承內環采用液壓方法拆卸.在軸上設置的油孔上施加油壓,使其易于抽出.軸承寬度由液壓方法,、拉伸,、夾緊和拆卸操作.淮安INA軸承感應加熱可以用來拆卸NU和NJ圓柱滾子軸承的內圈.內環加熱拉拔,內環在短時間內膨脹.

The inner ring of large bearing is disassembled by hydraulic method. The oil pressure is applied on the oil hole arranged on the shaft to make it easy to extract. Bearing width is operated by hydraulic method, stretching, clamping and disassembly. Induction heating of Huaian INA bearings can be used to remove the inner rings of NU and NJ cylindrical roller bearings. The inner ring is heated and drawn, and the inner ring expands in a short time.

圓柱和圓錐孔軸承的拆卸和安裝應仔細進行.軸承和部件的拆卸,特別是過盈配合軸承,尤其難以操作.

The disassembly and installation of cylindrical and tapered hole bearings should be carried out carefully. Removal of bearings and components, especially interference fit bearings, is particularly difficult to operate.

據不完全統計,每輛車應使用100～150個以上的軸承,不同的功能應使用不同的軸承.那么,怎么會有這么多軸承一起啟動呢?在這種情況下,軸承采用了新的轉向技術,將各種軸承改造成自動變速器零件,、轉向柱聯軸器等,成為一個密切相關的電動轉向系統,并不斷提高滾動軸承的摩擦技術,因為汽車的zui大摩擦,如果淮安INA軸承摩擦不增加的話.重新啟動.在T壓力下,汽車會發生周期性的損壞,因此可以通過技術手段克服軸承的損壞.克服了這個困難.

According to incomplete statistics, more than 100 to 150 bearings should be used for each vehicle, and different bearings should be used for different functions. So, how can so many bearings start together? In this case, the bearings adopt new steering technology, transforming various bearings into automatic transmission parts, steering column coupling, etc., to become a closely related electric steering system, and constantly improve the friction technology of rolling bearings, because the Zui friction of automobiles, if Huaian INA bearing friction does not increase. Restart. Under T pressure, automobile will suffer periodic damage, so bearing damage can be overcome by technical means. Overcame this difficulty.

目前,汽車節能減排的課題非常熱門.由于汽車碳排放量大,軸承汽車軸承的解決方案也提出了降低能耗,生產節能,、資源節約型環保產品,zhen正實現汽車的節能減排.節能減排.無憂,、安心,、安穩,、信賴的產品.

At present, the topic of automobile energy saving and emission reduction is very popular. Because of the large carbon emissions of automobiles, the solution of bearing automobile bearings also puts forward to reduce energy consumption, produce energy-saving and resource-saving environmental protection products. Zhenzhen is realizing energy-saving and emission reduction of automobiles. Conserve energy,reduce emissions. Worry-free, reassuring, stable and reliable products.

文章來自:淮安SKF軸承 -

Article from: Huaian SKF Bearing -

文章來自:淮安INA軸承 -

Article from: Huaian INA Bearing -

文章來自:淮安NSK軸承

Article from: Huaian NSK Bearing

QQ:

電話:0

手機:/